Lin Forge Cold forged screws and custom fasteners

Drawing sample: hex flange bolt M8. Select a row and the matching dimension lights up.

Nominal diameter
M8 × 1.25
Length
30 mm
Thread length
22 mm
Flange diameter
Ø17.9 mm
Head height
8 mm
Grade, material
Grade 10.9, SCM435 alloy steel (demo)
Finish
Zinc nickel plating
Standard
DIN 6921 / ISO 4162
MOQ
50,000 pcs
Lead time
Samples 14 days, production 35 days
3022M8Ø17.98
PartHex flange bolt
Drawing no.LF-M8-0301 (demo)
Scale2 : 1
MaterialSCM435
Unitmm
Pointer (mm)X 0.00 Y 0.00
1989
Founded
14units
Cold forging machines
12million pcs
Monthly output
23
Export countries
3(demo)
Certificates

All figures are demo data.

Product lines

Seven families, from standard hex bolts to special forgings made to your drawing. Open a row for uses and finish options.

Hex head bolts六角頭螺栓

Carbon and alloy steelM5 to M20, length 10 to 200 mmDIN 933, DIN 931, ISO 401730,000 pcs
Features
Full thread or partial thread. Serrations under the head on request.
Typical uses
Steel structures, machinery, general assembly
Finishes
Zinc plating, hot dip galvanizing, zinc nickel, Dacromet
Size table and drawings

Hex flange bolts六角法蘭螺栓

Alloy steelM6 to M14, length 12 to 120 mmDIN 6921, ISO 416250,000 pcs
Features
The wide flange replaces a separate washer. Common on chassis and engine mounts.
Typical uses
Automotive chassis, engine mounts, motorcycles
Finishes
Zinc nickel, Dacromet, zinc flake coating
Size table and drawings

Socket head cap screws內六角螺絲

Alloy steel, grade 12.9M3 to M16, length 6 to 100 mmDIN 912, ISO 476250,000 pcs
Features
Cylindrical head with hex socket, usable where space is tight.
Typical uses
Dies, machine tools, automation equipment
Finishes
Black oxide, nickel plating, Dacromet
Size table and drawings

Nuts and flange nuts螺帽與法蘭螺帽

Carbon steelM5 to M16ISO 4032, DIN 6923100,000 pcs
Features
Hex nuts and flange nuts, with optional pre applied locking compound.
Typical uses
Shipped as a set with our bolts
Finishes
Zinc plating, zinc nickel, Dacromet
Size table and drawings

Special forgings and custom parts特殊鍛件與客製異形件

Carbon, alloy and stainless steelHead up to 40 mm, length up to 200 mmPer customer drawing20,000 pcs
Features
Multi station cold forming in one pass: odd heads, stepped shafts, splined parts.
Typical uses
Automotive parts, power tools, appliances
Finishes
As specified on your drawing
Size table and drawings

Self tapping and self drilling screws自攻與自鑽螺絲

Case hardened carbon steelST3.5 to ST6.3, length 9.5 to 100 mmDIN 7981, DIN 7504100,000 pcs
Features
Case hardened. Drill point and thread form chosen by sheet thickness.
Typical uses
Metal roofing, light steel frames, HVAC ducts
Finishes
Zinc plating, coating, Dacromet
Size table and drawings

Machine screws機械螺絲

Carbon steel, stainless A2M2 to M8, length 4 to 50 mmISO 7045, ISO 7046200,000 pcs
Features
Pan head and countersunk head with cross recess. Stainless parts can be passivated.
Typical uses
Electronics, appliances, instruments
Finishes
Zinc plating, nickel plating, passivation
Size table and drawings

Seven partsyou can customize

1537264
  1. Head shapeStandard: hex, flange, pan, countersunk. Custom: any head profile on your drawing.
  2. Drive recessStandard: cross, slotted, hex socket, torx. Custom: special recesses, tamper proof.
  3. Shank and lengthStandard: M3 to M20, up to 200 mm. Custom: stepped or reduced shank.
  4. Thread formStandard: coarse, fine, full, partial. Custom: self tapping forms, special gauges.
  5. Material and gradeStandard: carbon, alloy, stainless, grades 4.8 to 12.9. Custom: named wire mill and heat number.
  6. Surface finishStandard: zinc, zinc nickel, Dacromet, black oxide. Custom: set coating thickness and salt spray hours.
  7. Locking and pre coatStandard: nylon patch, pre applied locking compound. Custom: serrations under head, your choice of compound.

Six stations from wire to shipment

Every station has measuring points and records. Details are on the Process and Quality page.

  1. 01

    Wire preparation

    Incoming chemistry check, drawing, then spheroidize annealing.

  2. 02

    Cold forging

    Multi station presses form head and shank in one pass.

  3. 03

    Thread rolling

    Rolled threads, gauged every batch.

  4. 04

    Heat treatment

    Continuous furnace quench and temper, hardness sampled per load.

  5. 05

    Surface finish

    Done at partner plating lines (outsourced), coating and salt spray tested.

  6. 06

    Inspection and packing

    Optical sorting plus manual recheck, packed by lot.

A row of freshly formed silver bolt blanks beside a cold forging machine
Freshly formed blanks beside a cold forging machine (AI generated illustration)

Full process, equipment and inspection

Quality certification

Certificates and test reports come with any inquiry. Customer audits are welcome.

CertificationScopeCertificate no.Valid until
ISO 9001 (demo)Design and manufacture of cold forged fastenersDEMO-QMS-00012027/06
IATF 16949 (demo)Manufacture of automotive fastenersDEMO-AUTO-00022027/03
ISO 14001 (demo)Environmental management systemDEMO-EMS-00032027/09

All of the above is demo data, not real certificates. Certificates and test equipment

Exporting to 23 countries

Mostly by sea from Kaohsiung. Europe and North America add up to about 60 percent.

RegionShareTermsSea freight (approx.)
Europe38%FOB / CIF30 to 35 days
North America24%CIF18 to 25 days
Japan and Korea17%FOB4 to 7 days
Southeast Asia14%FOB5 to 10 days
Middle East and others7%CIF20 to 28 days

Map and figures are demo content and do not represent real customers.

Inquiry

Send a drawing or describe the spec. We reply on feasibility and a first quote within two working days. Fill in the form and the sheet on the left updates as you type.

Send your inquiry

This is a demo site. The form is not actually sent.

InquiryCatalog