Products

Seven families of cold forged fasteners. Filter by material, grade and standard, then open a row for size tables and drawings.

PageProducts
Drawing no.LF-PL-001
Items7
MaterialBy family
Unitmm
Screws, nuts and a caliper laid out neatly on a table
Standard part samples (AI generated illustration)

Hex head bolts六角頭螺栓

Carbon and alloy steelM5 to M20, length 10 to 200 mmDIN 933, DIN 931, ISO 4017

About this family

Full thread or partial thread. Serrations under the head on request.

Uses: Steel structures, machinery, general assembly
Finishes: Zinc plating, hot dip galvanizing, zinc nickel, Dacromet
Standard: DIN 933, DIN 931, ISO 4017

SizePitchAcross flats sHead height k
M61.0104.0
M81.25135.3
M101.5166.4
M121.75187.5

Nominal standard values in mm. The drawing agreed by both sides governs the order.

Hex flange bolts六角法蘭螺栓

Alloy steelM6 to M14, length 12 to 120 mmDIN 6921, ISO 4162
3022M8Ø17.98

About this family

The wide flange replaces a separate washer. Common on chassis and engine mounts.

Uses: Automotive chassis, engine mounts, motorcycles
Finishes: Zinc nickel, Dacromet, zinc flake coating
Standard: DIN 6921, ISO 4162

SizePitchAcross flats sHead height kFlange dia. dc
M61.010614.2
M81.2513817.9
M101.5151022.3
M121.75161226.6

Nominal standard values in mm. The drawing agreed by both sides governs the order.

Socket head cap screws內六角螺絲

Alloy steel, grade 12.9M3 to M16, length 6 to 100 mmDIN 912, ISO 4762

About this family

Cylindrical head with hex socket, usable where space is tight.

Uses: Dies, machine tools, automation equipment
Finishes: Black oxide, nickel plating, Dacromet
Standard: DIN 912, ISO 4762

SizePitchHead dia. dkHead height kSocket s
M61.01065
M81.251386
M101.516108
M121.75181210

Nominal standard values in mm. The drawing agreed by both sides governs the order.

Nuts and flange nuts螺帽與法蘭螺帽

Carbon steelM5 to M16ISO 4032, DIN 6923

About this family

Hex nuts and flange nuts, with optional pre applied locking compound.

Uses: Shipped as a set with our bolts
Finishes: Zinc plating, zinc nickel, Dacromet
Standard: ISO 4032, DIN 6923

SizePitchAcross flats sThickness m
M61.0105.2
M81.25136.8
M101.5168.4
M121.751810.8

Nominal standard values in mm. The drawing agreed by both sides governs the order.

Special forgings and custom parts特殊鍛件與客製異形件

Carbon, alloy and stainless steelHead up to 40 mm, length up to 200 mmPer customer drawing

About this family

Multi station cold forming in one pass: odd heads, stepped shafts, splined parts.

Uses: Automotive parts, power tools, appliances
Finishes: As specified on your drawing
Standard: Per customer drawing

ItemRange
Max head diameter40 mm
Max length200 mm
Wire diameter3 to 24 mm
Typical tolerance±0.05 mm

Nominal standard values in mm. The drawing agreed by both sides governs the order.

Self tapping and self drilling screws自攻與自鑽螺絲

Case hardened carbon steelST3.5 to ST6.3, length 9.5 to 100 mmDIN 7981, DIN 7504

About this family

Case hardened. Drill point and thread form chosen by sheet thickness.

Uses: Metal roofing, light steel frames, HVAC ducts
Finishes: Zinc plating, coating, Dacromet
Standard: DIN 7981, DIN 7504

SizePitchCommon lengths
ST4.21.413 / 19 / 25 / 38
ST4.81.616 / 25 / 32 / 50
ST6.31.825 / 38 / 50 / 75

Nominal standard values in mm. The drawing agreed by both sides governs the order.

Machine screws機械螺絲

Carbon steel, stainless A2M2 to M8, length 4 to 50 mmISO 7045, ISO 7046

About this family

Pan head and countersunk head with cross recess. Stainless parts can be passivated.

Uses: Electronics, appliances, instruments
Finishes: Zinc plating, nickel plating, passivation
Standard: ISO 7045, ISO 7046

SizePitchHead dia. dkHead height k
M30.55.62.4
M40.78.03.1
M50.89.53.8

Nominal standard values in mm. The drawing agreed by both sides governs the order.

No items match these filters

Combinations not in our standard families can usually be made with custom tooling.

Send a drawing

Custom parts in five steps

Every step from drawing to shipment has a clear number of days.

  1. Day 0

    Send drawing or sample

    PDF, DWG, STEP or a physical sample.

  2. 2 working days

    Feasibility reply

    We tell you if it can be made, the tooling plan and a first quote.

  3. 14 to 21 days

    Tooling and samples

    Samples come with a dimension report. Tooling cost is itemized in the quote.

  4. 7 to 10 days

    Trial run and approval

    Small trial lot with a first article report. Production starts after approval.

  5. 35 to 45 days

    Production and shipment

    We handle container loading and export documents.

MOQ and lead times

Typical figures. The quotation governs.

ItemQuantityLead timeNotes
Samples, existing tooling500 to 2,000 pcs7 to 14 daysWith dimension report
Samples, new toolingPer drawing14 to 21 daysTooling billed separately
Trial lot10,000 to 30,000 pcs25 to 30 daysMass production after approval
Standard partsFrom 30,000 pcs35 daysSplit shipments possible
Custom partsFrom 50,000 pcs35 to 45 daysNew tooling

We do not take one off handmade parts or non metal parts.

Catalog and downloads

Files are not actually downloaded on this demo site.

  • Product catalog PDF48 pages, 8.4 MB, updated 2026/10
  • Standard drawings ZIPDWG and PDF, 22 MB
  • Material certificate sample PDF3 pages, 0.6 MB
  • Packing and labeling guide PDF6 pages, 1.1 MB

Send a drawing and hear back on feasibility within two working days

Send an inquiry
InquiryCatalog